Neoteck 0-1"/0.001" Dial Indicator Table Saw Gauge Suitable for Table Saws with a Groove Width of 3/4" (19mm) or more for Aligning and Calibrating Workshop,Machinery,Band Saw and Drill Press-Silver
【Professional Table Saw Dial Indicator Gauge】Neoteck table saw calibrator is a test tool designed according to the standard miter slot size (3/8 "x 3/4"), and it can test your table saw, fence alignment and position problems. Dial indicator table saw gauge can check arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out or any other alignment measurement you desire. It is widely used in calibration work, shop machinery, band saws and drilling machines.
【 High Precision Measurement 】The measurement range of this table saw blade alignment gauge is 0 - 1 " and the high resolution can reach 0.001 ", which can reduce the measurement error. Neoteck table saw dial indicator gauge scale is clear and easy to read, which helps you get the measurement results quickly and accurately, so that you can do your job better.
【 Precise Anodized Aluminum Bar 】The anodized alumina rod of this alignment dial indicator gauge is machined by CNC with an accuracy of up to 0.02mm, which reduces the gap loosening after the aluminum alloy rod is fixed and does not shake after installation. In addition, because the bar is made of high-quality aluminum alloy material, it can reduce wear, prevent rust and extend service time.
【 Three-Chute Design 】The anodized aluminum bar of table saw gauge adopts 3 chute design, which can meet more dimensional requirements and ensure the hardness and applicability of the bar. And the length of the dial gauge rod is 18cm, which can be widely used in a variety of scenarios. (Note: aluminum alloy bar is suitable for table saws with a groove width of 3/4" (19mm) or more, if the groove width exceeds 3/4" (19mm), it can be adjusted using screws to achieve the most suitable groove width.)
【Complete Package】Package includes:1 * Dial Indicator,1 * Chute Rod: L155 x 19 x 9.3mm (6.1 x 0.75 x 0.37 inch）,1 * Dial Gauge Rod: L180 x W19 x H19mm (7 x 0.75 x 0.75 inch),2 * Springs ,6*Screws,2 * Metal Gaskets,2 * Hex Key.
HDMI Extender Neoteck 50m HDMI Repeater with 2 Port HDMI Splitter Loop IR Remote 1080P Ethernet Network Extender Over Single RJ45 Cat6 Cat7 Cables for PC DVD Sky HD Box PS3 Satellite Box
KWD 22.500
Neoteck 3 Way Coax Cable Splitter MoCA 5-2500MHz, TV Antenna Splitter
KWD 4.500
Neoteck Voltage Tester/Non Contact Voltage Tester 12-1000V/48V-1000 Adjustable Sensitivity AC Voltage Detector Tester Pen Live/Null Wire Tester With Indicator Lamp Buzzer Alarm Wire Breakpoint Finder
KWD 5.500
Neoteck 192kHz DAC Converter with Bluetooth 5.1 Receiver 7ft/2.1m Optical to RCA Cable SPDIF to RCA Digital to Analog Converter with Built-in Audio Amplifier Chip for HDTVs Set-Top Box etc-Male Output
KWD 8.500
