1.Compatible battery types and sizes：Li-ion / IMR/LiFePO4: 26650，20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440，NiMH/Cd: AA, AAA，SC, C（It cannot charge 1.5V AA AAA batteries）
2.Multi-functional LCD charging display: for battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A
3.This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO
4.Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety
5.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
6.LCD: While power supply connected, the LCD will light up for 3S: 1) If no battery is inserted, the LCD will display “null” and will be off in 30S 2) When battery is inserted and detected, the LCD will show channel number while the battery type image “ Li-Ion 3.7V”flashing indicating to set the battery type: this moment if short click the channel button, it can set battery type; if no operation in 5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH) then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display“100%”mean while it shows “End” on the LCD right down corner.
7.Note：Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit，If DC input, only 12V 1A is recommended，Mind heating while charging，Remove the charger from power source after charging complete, and remove the battery from the charger at the same time.For indoor use only