Search

Search

Threaded Inlet Strainer Kit for Stock Tank Pools,Stock Tank Pool Filter Kit, Intex Pool Accessories, Includes Rubber Washer, Strainer Nut and Grid, Fits Intex Filter Pumps with 1-1/2" Hoses

KWD 6.500
Brand
KSJED
Weight
454 g
– 1 +

Special Features

  • 【Material】: Stock tank pool filter combo is injection molded, which is also made of high-density rubber and high-quality plastic material，is more able to withstand high water pressure operation.The rubber washer is soft enough to provide a watertight seal effect.
  • 【Fit for】：This kit works with the following Intex filter pumps: Intex 1,500 GPH Cartridge Filter Pump (Model 635T)，Intex 2,500 GPH Cartridge Filter Pump (Model 633T)，Intex 10" Sand Filter Pump (Model SF90110-1), Intex 12" Sand Filter Pump (Model SF80110-2), Intex 14" Sand Filter Pump (Model SF70110-2), Intex 16" Sand Filter Pump.
  • 【Function】：These water directional flow inlet fitting is fully adjustable to direct flow to most area of pool giving proper circulation pattern, also allow to control the velocity and flow.Our removable drain filters come with grating, Designed to easily catch hair without blocking drainage and effortlessly prevents leaves, toys or objects from escaping down the drain. Protect your filter pump from harm.
  • 【Including】：This inlet strainer kit includes a threaded inlet strainer connector (with integrated grill), flat rubber washer, and strainer nut. It is designed to work for above-ground pools and stock tank pools which use Intex or Bestway filter pumps with 1-1/2" inside diameter hoses.
  • 【Else】：Please ensure sure your pump has threaded 1-1/2" hoses, if not you will need an adapter (1-1/4" to 1-1/2") for 1-1/4" hoses. If you have one of the following filter pumps (which have 1-1/4" hoses) you will need the Intex adapter for 1-1/2" to 1-1/4" hoses: Intex 330 GPH Cartridge Filter Pump (Model 601), Intex 530 GPH Cartridge Filter Pump (Model 603), Intex 1,000 GPH Cartridge Filter Pump (Model 637R)

Description

Installation steps：

1、Find a 4" x 4" area on the side of your stock tank.

2、Drill a 2-3/4" hole, leave at least 3/4" distance around the ribs of the tank.

3、Insert the connector after applying silicone (If the tank has vertical ribs, apply a bead of silicone caulk on the flat rubber washer which faces the tank).

4、Let threaded connector and rubber washer slide through hole from the inside of the tank.

5、Tighten them up as much as you can.

6、And then connect the plunger valves and pump hoses (Not Included).

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}