The angle grinder wire wheel cup brushes are made of high quality carbon steel wire. The featured design of the wire wheels and wire cup brushes will allow to meet different requirements for both large flat surface and irregular spaces, work from light to heavy duty.
This grinder wire brush set is constructed with two strengthen steel plates to hold the wires to prevent the wires from falling or flying. The carbon steel wires will also secure a great durability.
The wire brush for grinder can be used on both light and heavy duty work. It works on metal, woods and other materials to remove rust, paint, weld scale, corrosion, spatter and so on.
0.014” thick carbon steel crimped wires, 3 inch wire cup, MAX RPM 12,500, 5/8 Inch-11 UNC standard threaded arbor to be compatible with lots of angle grinders.
For your safty, before use wire wheel for angle grinder, please make sure wear a pair of safety glasses, safety mask and protective gloves.
Description
Brush Diameter: 3-inch, Arbor: 5/8-inch - 11, Max RPM: 12,500
-13%
Scotch-Brite XL-WL Deburring Abrasive Wheel, Silicon Carbide, 6" Diameter, 1" Width, 1" Arbor, 8S, Fine Grit (Pack of 1)
KWD 30
Toolocity GSB0240G 4-Inch Green Grinding Stone 240 Grit with 5/8-11 Thread
KWD 4.500
Climax Metals CR-9-6X5 CR-9-6 Standard Tapered Type Mandrels for Cartridge Rolls (Pack of 5)
KWD 10
Abrasive Belts 4-Inch Diameter by 4-Inch Wide Bent Coarse Wire Wheel, Silver, for Angle Grinder, Rust Removal, Corrosion, Stripping and Paint - Wire Abrasive
KWD 10.500
