"
Compatible Models :

S/L0/56/ZE

F'ire HD 10.1

F'ire HD 10.1 7th

Fire HD 10.1 Battery Part Number :

58/00/01/87

26S/10/15/A

Installation precautions :

Our battery is compatible with K 9th and 7th generations. There are only slight changes in the installation between the two, but it will not affect the use.
The relevant operations are as follows:
(1)If the battery is installed on the 7th generation machine, you can find that our interface cable is longer. At this time, you need to bend the interface cable slightly and then insert it into the machine interface.

Then align the battery with the left hole and insert it into the machine, and then fix it. At this time, you will find that the battery lacks 3 empty positions. These three holes do not need to be fixed. As long as the screws of other holes are fixed, the battery will not loosen easily. (As shown in Figure 3)

(2)If your machine is a 9th generation, the installation of the interface cable and hole is consistent with the original battery. (As shown in Figure 4)
You can browse the above in detail and actually operate it. I hope it can help you! Finally, if you have any questions and suggestions, you can email us!

Precautions :

It is strictly forbidden to over-discharge, squeeze, incinerate or heat the battery

Do not short circuit; Do not directly weld on the surface of the battery

It is strictly forbidden to use or heat outside the allowable temperature range

It is forbidden to disassemble the inside of the battery by yourself

When the battery is used to the end voltage, it should be taken out of the instrument in time

Please strictly abide by the above precautions to avoid improper operation and use of the battery, which may cause battery swelling, leakage or even explosion