Pico 2 W with Pre-Soldered Header Compatible with Raspberry Pi Pico 2 W Microcontroller Board, 2.4GHz 802.11n Wireless LAN WiFi 4 and Bluetooth 5.2, Based on RP2350 Dual-Core & Dual-Architecture
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
RPi Pico 2 W Microcontroller Board (with pre-soldered header (mono)), Based on Official RP2350 Chip, Dual-core & Dual-architecture Design. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz.
Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2.
520KB of SRAM, and 4MB of on-board Flash memory.
Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB.
ESP32-S3-Nano Microcontroller Development Board with Pre-Soldered Header, Based on ESP32-S3R8 Chip, Integrates 2.4GHz Wi-Fi and Bluetooth LE Dual-Mode Compatible with Arduino Nano ESP32
KWD 6
DSI FPC Flexible Cable for Raspberry Pi 5, Pi5 Display Cable for Suitable for DSI Display Screens, 22Pin to 15Pin, 200mm Length,Black EMI Shielding Film, More Stable Signal Transmission
KWD 3.500
1.83inch Round LCD Display Module 240×280 Resolution IPS LCD SPI Interface 65K Colors Rounded Corners Micro LCD Display for Raspberry Pi 5/4B/ 3B+/Pi3B/Raspberry Pi Zero W/2W, STM32,ESP32 etc.
KWD 6.500
Basic Kit with Pre Soldered Header Raspberry Pi Zero 2 W and Mini HDMI to HDMI Adapter and Micro USB OTG Cable, Five Times Faster, Quad-core ARM Processor
KWD 16
