Lamp model: V13H010L85 / ELPLP85
Wattage: 250W
Lamp Life:3000-4000 Hours
Warranty time: 180 Days
TYPE: 1*new replacement projector Lamp bulb with housing

COMPATIBLE MODULES(Ctrl+F to find your model) : Fit for EPSON EH-TW6300 EH-TW6600 EH-TW6600W EH-TW6700 EH-TW6700W EH-TW6800 EH-TW7100 PowerLite Home Cinema 3000/PowerLite Home Cinema 3100/PowerLite Home Cinema 3200/PowerLite Home Cinema 3500/PowerLite Home Cinema 3510/PowerLite Home Cinema 3600E/PowerLite Home Cinema 3700 /PowerLite Home Cinema 3800/PowerLite Home Cinema 3900 H651A Projector;

If you're not sure whether it's compatible with your projector, or if you have any problems when using it, you can send us an email or leave a QA. Our after-sales team will help you.

9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.