Search

Solar Surge Protector Device,Replacement for Midnite Solar MNSPD600

KWD 38

Brand
YiYou
Category
Surge Protectors
Weight
380 g
1 +

Special Features

  • The YiYou Solar Surge Replacement midnite solar Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. Protection for grid-tie PV combiners and inverter input circuits.
  • Solar Surge Replacement midnite solar MNSPD-600-DC Surge Protector For all DC circuits up to 600 volts .The DC SPD will work well on all DC circuits up to 600 volts as well . The difference between the AC and DC SPD is the way the LED's are powered. The protection side of things is identical.
  • Grounding System:A good grounding system is essential for both safety and lightning protection.The NEC recommends a grounding resistance of 25 ohms or less. The lightning protection industry recommends a grounding resistance of 10 ohms or less. A thorough evaluation of the grounding system is strongly recommended. 1) This product contains no serviceable parts. 2) Use a power cord suitable for 90°C. The wire used to connect the SPD to the line or bus should not be longer than necessary and should be free of unnecessary bends.
  • Perfect for:Off-grid and grid-tie solar systems/Residential and commercial solar installations/DIY solar enthusiasts and professional installers Device to ensure long-lasting performance and protection for your solar power system. Don't let unexpected surges compromise your sustainable energy solution – choose YiYou for peace of mind and reliable surge protection.
  • Note:Before installation or maintenance, check to ensure that the system voltage does not exceed the SPD voltage requirements and that the correct SPD voltage/type has been selected.This unit must be installed in accordance with the National Electrical Code (ANSI/NFPA-70) and applicable local codes.Ungrounded power systems are inherently unstable and, under certain fault conditions, may produce excessive line-to-ground voltages. Under these fault conditions, any electrical device,including SPDs,may be subjected to voltages exceeding its design ratings.

Description

Solar Surge Protector Device,Replacement for Midnite Solar MNSPD600

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}