3Pin 5V ARGB Controller Cable
 1. This controller is a 5V 3-pin ARGB product that uses SATA power supply. It does not need a motherboard to support 5V ARGB, and it can be directly plugged into the SATA interface for power supply.
 2. The product has a built-in lighting mode, and the lighting control of 5V 3-pin ARGB products can be realized by pressing the button.
 3.5v 3-pin interface adopts an extension cable design, which is convenient to connect and not easy to fall off. At the same time, it solves the problem of insufficient cable length
 4.3-pin interface has a protective cover to protect the needle from bending and deformation
 5. High-quality workmanship, small and exquisite, individual appearance, help you create cool light effects
 6. Key function usage:
 M key: Click to switch to the next light mode, and you can cycle through the controller's own light mode
 S key: Single click to switch the speed of light conversion, there are 8 gears to switch cyclically
 Long press the S button for 4 seconds to turn off the light, then long press for 4 seconds to turn on the light
 C key: Click to switch to other light colors in the same mode or make the light cycle backward
 Long press the C button for 5 seconds to switch the brightness of the light, a total of 6 levels of brightness can be switched in cycles
 7. Light mode: colorful streamer, marquee, colorful loop, single color breathing, etc.
8. Note: This controller does not support connecting the motherboard software to control the light synchronization

 Specifications:
 Product name: ARGB mini controller
 Size: 50*22*8.5mm
 Color: Black
Interface type: SATA .3PIN
Cable length 3PIN: 160( 10)mm SATA:500( 10)mm

 Packaging:
 1 x 3Pin 5V ARGB Controller Cable