Quantity:(10-Pack)
Size:Length,width,Height (3.3cm*1.6cm*1.5cm)
Material:(PC Plastic+ Stainless Steel Shell).
Color:(Silver)

Connectors 1 & 2 : Cat7 keystone Female jack ,

RJ45 Cat7 keystone Transmission rate:10Gbps(10 Gigabit Ethernet),Transmission bandwidth: Up to 600Mhz.
The transmission distance is 100 meters/328 Feet in theory.
In order to maintain good network performance, the wiring length of the network cable should not exceed 70 meters/230 Feet .
(Note: The longer the network cable is, the more serious the signal attenuation will be, which will affect the network speed. )
compatible with cat7, cat6a, cat6, cat5e, cat5e cable and UTP, STP cabling system.

RJ45 Cat7 Shielded coupler extender is smaller and lighter than traditional ones and can be easily inserted into wall plates and patch panels even with small spacing. Made of ABS material which is flame-retardant and high-impact ensuring safer istallation.

Installation Tips:
1. RJ45 Cat7 Keystone Jack Insert is vertically oriented
2. Hook the bottom lip into the cut-out while holding the keystone insert at a slight angle
3. Rotate the insert upward to snap the retaining clip on the top into the cut-out until it snaps into place
4. Connect an RJ45 Cat7 Keystone adapter to route cables in tight spaces
5. Test all the cabling with the keystone insert before installing permanently in the wall

6:(Note: This RJ45 Cat7 Keystone adapter may not be suitable for the ultra-thin decorative wall panel of the trapezoidal jack. Please think about your installation position before loading. The RJ45 Cat7 Keystone adapter is difficult to remove after installation.)

RJ45 Cat7 Keystone Jack insert provides a simple and secure way to connect RJ45/Cat7 cables into a wall plate for a professional-looking installation. Disguise your cables behind the wall instead of running them on the floor in a tangled mess.