LD2410C is a high sensitivity 24GHz human presence state sensing module. Its working principle is to use FMCW FM continuous wave to detect human targets in the set space
24GHz ISM band, the farthest sensing distance is up to 5 meters, the detection angle is large, and the coverage range can reach ± 60 degrees.
Accurate identification within the interval, support sensing range division, shielding interference outside the interval.
Multi-level intelligent parameter adjustment can be realized through Bluetooth or serial port to meet the needs of scene changes, visual debugging and configuration tools.
Support GPIO and UART output, plug and play, flexible application to different intelligent scenarios and terminal products.
Description
Specification:
Frequency: 24GHz~24.25GHz
Modulation mode: FMCW
Detection distance: 0.75m~6m adjustable
Detection angle: ± 60°
Power supply: 5V
Current: 79mA
Output serial port level: 3.3V
Sweep bandwidth: 250MHz
Range resolution 0.75m
Ambient temperature: - 40℃~+85℃
Data format: serial port ASCII output/high and low level 3.3V&0V
Module size: 16mmx22mm, with 5 pin holes reserved for hardware (factory default pin)
The hole diameter of pin hole is 0.9mm, and the distance between bow and foot is 2.54mm
Interface type:
UART_ Rx: Serial port Rx pin
UART_ Tx: Serial port Tx pin
OUT: detection of human presence: output high level; No human presence: output low level
GND: Power ground
VCC: Power supply input 5V~12V
package included:
2pcs LD2410 Human Presence Radar Sensor Module