When setting up RG213 cables, steer clear of any unnecessary tugging or bending. Make sure the PL259 connectors are screwed on tight, but be careful not to overdo it, as that could cause damage. Regularly check the physical condition of the cables and the stability of the connectors.
Main Electrical properties:
Impedance: 50±2Ohm
Rated Capacitance: 104 pf/m (31.7 pf/ft)
Operating frequency: 1~2000MHz
VSWR: 1.25 Max
Velocity Factor Percentage: 66%
Loss Per ft. at 400 MHz: 0.442 dB
Loss Per ft. at 900 MHz: 0.080 dB
Loss Per ft. at 1800 MHz: 0.123 dB
Loss Per ft. at 2500 MHz: 0.154 dB
Coaxial Cable Type: RG-213
Cable Connector End 1: PL-259
Cable Connector End 2: PL-259
Mechanical Construction:
Center Conductor Material: Bare copper
Center Conductor Construction: 7 strands - 0.0295in(0.75mm)
(2.25±0.02mm) = 0.0878in
Dielectric Material: Polyethylene
Dielectric Outside Diameter: 0.295 in
Shield 1 Construction: Braided
Shield 1 Material: Bare copper
7.93±0.15mm = 0.3063±0.01in （24*9/0.15mm）
Shield 1 Percent Coverage: 96-97
Jacket: PVC Black
(10.10±0.20mm) = 0.3898±0.016in
Engineering data:
Maximum Pull Tension: 56 Ibs
Minimum bending radius: 102mm
Operating temperature: -20~+70°C
UV-Resistant: Yes
Direct Bury: Yes