1、Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this POE combiner splitter adapter kit to make your installation much easier and avoid running another long cable.
2、Our poe combiner splitter adapter kit can transfer 2 network devices using one Ethernet cable. Save on wiring costs. Suitable for network monitoring systems, network integrated wiring. It is worth noting that this product can only be used for network transmission within 130M. Gigabit transmission is not supported.
Specification:
Compliant Protocol: IEEE802.3af
Power Supply Mode: Compatible with both mode A (end jumper method) and mode B (middle jumper method).
Ethernet Communication Interface: RJ45
Data Transfer Rate: 10/100Mbps
Transmission Medium: CAT5 / CAT 5e / CAT6 Standard Network Cable
Transmission Distance: Approx 50 meters
Package Include:
2 x PoE Combiner
2 x PoE Splitter
6 x Waterproof Cap
Note:
1. Only the RJ45 cable with simple crystal head can pass through the waterproof screw cap, the sheathed RJ45 would not pass.
2. This priduct support POE device transmission, but can not replace POE function. You cannot convert a normal device to a POE device by using this device.
3. Support simultaneous networking of two cameras.
4. Works with most PoE switches and PoE cameras.