Search

Search

GDSTIME 2-Pack 24V 6015 60mm x 15mm Dual Ball Bearing Brushless DC Cooling Fan 2-Pin for CR-6 Ender 3S1 Pro 3D Printer Part

KWD 5.500
KWD 7
Brand
GDSTIME
Category
Fans & Cooling
– 1 +

Special Features

  • Slim 60x15mm Size: Ideal replacement for older or broken 12V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc. suitable for CR-6 Ender 3S1 Pro 3D Printer and so on; Keep your electronic devices cool and extend their lifespan
  • Dual Ball Motors: Dual-ball bearings rated at 50,000 hours allows the fans to be laid flat or stand upright; Operating Voltage Range: 14-26V DC; Keep your electronic devices cool and extend their lifespan
  • 2-Pin Connector: 2-wire terminated with XH2.54-2Pin connector for power supply; make sure positive (+) and negative (-) poles are in right place and match up to your 3d printer motherboard (Red wire : positve, Black: negative)
  • 6015 Fan 24V Specs: Size: 60 x 60 x 15 mm (2.36 x 2.36 x 0.59 inches) | Hole to Hole Distance: 50 mm (1.97 inches) | Rated Voltage: 24 Volt | Rated Current: 0.1 A | Power: 2.4 W | Speed: 4500 RPM | Noise: 32.4 dBA | Airflow: 24.8 CFM | Static Pressure: 0.13 In H2O
  • What You Get: Includes 2 pcs 60x60x15mm 2pin 24v dc cooling fans, 2pcs 60 mm metal fan guards, 8 pcs screws and nuts; The lightweight slim design won't take up much space, suitable for installation in equipment with limited space

Description

60mm x 15mm Fan Description

This is a mini size 60x60x15mm cooling fan, which is made of PBT plastic material. Containing high quality dual ball bearings, the fans can be run continuously for 50,000 hours; Ideal replacement for noisy or broken 24V 6cm fans in 3D printer or any DIY cooling and narrow place.

Porduct Dimension
Total Dimensions: 2.36 x 2.36 x 0.59 inches (60 x 60 x 15 mm )
Hole to Hole Distance: 1.97 x 1.97 inches (50 x 50 mm)
Screw Hole Size: Ø 0.17 inches (Ø 4.3 mm)
Connector: 2-Pin
Cord Length: 9.84 inches (250 mm)

Product Performance and Technical Specs
Total Airflow: 24.8 CFM
Total Noise: 32.4 dBA
Fan Speed: 4500 RPM
Rated Voltage: 24 VDC
Operating Voltage: 14 to 26V DC
Power: 2.4 W
Current: 0.1 Amp
Static Pressure: 0.13 In-H2O
Operating Temperature: 14 to 167°F
Fan Bearings: Dual Bearing
Life Expectancy: 50,000 Hours

Package Includes:
2pcs 60x60x15 mm 24v 2pin cooling fan
2pcs Metal fan guards
8cs Screw and nuts
Note:
1.Transition: 1cm=10mm=0.39 in.
2.Please allow 0-1cm error due to manual measurement. please make sure you do not mind before you ordering.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}