Display the same image on multiple monitors: DTECH VGA Video Splitter is the best choice for splitting and carrying a video signal to multi displays with the same quality as the original signal.

The signal boost obtained by Video Signal Enhancement Technology allows you to not only split the signal but it also amplifies the video signal to increase the transmission distance to about 130 feet away. This is no small feat, your average VGA card, over a standard VGA cable, sends a clear VGA signal approximately 25 feet.

Ideal for digital signage applications, video presentations or sharing information with multiple users.

Specific

Input: 1 port 15 Pin VGA Female
Output: 4 port 15 Pin VGA Female
Resolution: 1920 x 1080 @ 60Hz
Bandwidth: 250MHz (allows for the transmission of large amounts of information at a very high rate of speed)
Transmission Distance: up to 131 ft. (40m)
Cascadable: cascading up to 3 levels
Plug-and-Play. No drivers required
Unit Size: 5.1 x 3.0 x 1.8 inches

Note
1- It doesn't support extended desktop display applications, is not for viewing different images on each of monitors.

2 - Only output port 1 with "SUPPORT DDC2" label have DDC 2 function, which means that the other output ports take their cues from the port 1. If you plug a DDC compatible monitor into the port 1, all other monitors must be able to support the highest resolution of the monitor connected to port 1 (you can set up all the output monitor's resolution as the same).

Original Packing Included

1 x DTECH VGA Splitter (1 input 4 output)
1 x Power Adapter
1 x User Manual