SMALL AND PRACTICAL REARVIEW CAMERA MOUNT, BRING YOU UNEXPECTED EFFECTS

Product Attributes
Stick-on Bracket Size: 2.28*2.19*0.53 inch
Suction Cup Bracket Size: 4.63*3.07*2.71 inch
Weight: 2.31 oz
Colors: Black
Material: ABS
Packaging: 1* Stick-on Camera Bracket + 1* Suction Cup Camera Mount

Product Feature
The car dash cam mount set features an adjustable design, firmly holding your reverse camera in place. Ideal as mini backup camera car accessories, these mounts are compatible with cars, trucks, and SUVs. Made of premium ABS material, which is scratch resistant, waterproof, durable, and high-temperature resistant

Product Functions
Our car dash cam mount set is designed to securely hold your reverse camera. Its adjustable features allow for optimal positioning, providing a clear view behind your vehicle. Our car dash cam mount can be used for old reversing camera bracket replacement and reversing camera bracket upgrade

Product Installation
Preparation: Keep you have all necessary tools and materials, including the camera bracket, screw, screwdriver, cleaning cloth
Surface Preparation: Thoroughly clean the chosen surface to remove any dirt, dust, grease, or debris, keep the surface is completely clean and dry
Position the Bracket: Remove the protective film, hold the bracket against the cleaned surface and position it where you want to install the camera
Attach the Bracket: Toggle the catch on the back side of the suction cup, press the suction cup tightly and turn the catch back. Make there are no air bubbles trapped between the suction cup and the surface. / Press the stick-on bracket firmly, give it a good tug after installation to keep it's secure
Secure the Camera: Use screws to secure the reversing camera to the long bracket with pre-mounted holes
Adjusting the Angle of View: Use the knob on the side of the bracket to adjust the general direction, and then use the 360° spherical rotating head attached to make fine adjustments. / Use a screwdriver to turn the screws in the round holes on the side, adjust the mounting panel up and down 180° to the appropriate position, and finally tighten the screws

Warm Reminder: Our reversing camera bracket does not apply to cameras without mounting tabs