Outdoor Electrical Box, Waterproof Electrical Junction Box IP65 ABS Plastic Enclosure with Fan & Thermostat, Mounting Plate and Hinged Lid (15.7" H x 11" L x 5.9" W)
【Sturdy and durable】The junction box is made of high-quality ABS material, which has good impact resistance and ensures good electrical insulation.
【EASY TO INSTALL】The waterproof box comes with a removable grill mounting plate and 2 mounting brackets, you can easily fix the device into the waterproof plastic box. The outdoor electrical box comes with mounting screws to hang on the wall or fence.
【Ventilation and Heat Sinks】 There are two high-volume 12-volt fans on either side of the junction box and a 1.77-inch diameter heat sink. There is also a 12 volt thermostat on the junction box. Please note that the 12 volt 1A power adapter is not included and must be purchased separately. When the temperature inside the junction box is above or equal to the start temperature, the fan will activate to quickly remove heat from the junction box, preventing excessive temperatures that could cause the unit to malfunction or operate improperly. When the temperature drops to the stop temperature, the fan stops running.
【Rainproof and dustproof】Outdoor all-weather electrical box, the outside of the air outlet is equipped with a rainproof shutter, built-in dustproof mesh, the window leaves are tilted downward by 45 degrees, and waterproof strips are used in the contact parts with the electrical box. The air inlet at the bottom is equipped with 2 dustproof nets and 1 piece of double-sided tape, and the dustproof net is pasted on the air inlet. Dust can be prevented from entering.
【Safety Protection】The electrical enclosure box is equipped with a simple non-slip buckle to fix the box door, waterproof and dustproof, and reserved lock holes to provide double safety protection.
【Product Dimensions】 The external dimensions of the project box are 15.7 "Hx11 "Lx5.9 "W inches and the internal dimensions are 13.8 "Hx10.6 "Lx5.1 "W inches.
Zero 1/2" 6FT, 10THHN Wire-Non-Metallic Connectors,Liquid Tight Hook-Up Whip, A/C Hook-up Whip Kit
KWD 10.500
-11%
Outdoor Electrical Box, Cold-Rolled Steel Plate, Aluminum Alloy Back Beam, One-Piece Ventilation Design, IP65 Waterproof, Wall/Pole Mounted (15.7" x 11.8" x 7.9")
KWD 46
5-Pack 1/2" Double Gang Receptacle Outlet Box Extenders - UL Listed - with 6-32 x 1.25 Screws - Electrical Outlet Extender for Electrical Box and Electrical Outlet Switches - Made in U.S.A.
KWD 8
MAKERELE Small Junction Box Plastic Hinged Cover Transparent Lid IP67 Outdoor Electrical Project with Plastic Enclosure 5.9×5.9×3.5 inch(150×150×90mm)
KWD 8.500
