The XL74610L ideal diode module is an ideal diode rectifier that replaces the XL74610 scheme. The unique advantage of this mechanism is that it does not use ground as a reference and adopts 3 A low internal resistance MOS with a current of about 3mQ has a small voltage drop during high current operation, avoiding the high voltage drop of 0.7V in ordinary diodes. The reduction in voltage drop also greatly reduces heating. A 0.3V Schottky diode has a heating power consumption of 3W when operating at 10A current. The measured L74610L ideal diode operates at 10A current, with a voltage drop of about 50mV and a heating power consumption of about 0 5W.
2、 Parameter Introduction
Working voltage: 1 5V - 36V
Working current:
12V 25 ° C without heat dissipation measures ≤ 15A (15A long-distance test for 30 minutes)
12V 25 ° C heat sink+air cooling ≤ 30A (30A long-distance test for 30 minutes)
Theoretical heat dissipation of 50A or above is also acceptable, but limited heat dissipation conditions of 30A or above have not been tested for long-distance running

Static current: 0ma (there will still be current when the load is in sleep or no load state)
Positioning method: Welding fixation
Module size: 17 * 10 * 3mm