Search

3.7V 3000mAh Lithium Rechargeable Battery 1S 1C LiPo Battery for Arduino NodeMCU ESP32 Development Board, with with JST 1.25 Plug Protection Board and Insulated Rubber Tape

KWD 12
KWD 12.500

Brand
Hiteuoms
Weight
63 g
1 +

Special Features

  • ✔【Application】These 3.7V 3000mAh LiPo batteries are perfect for Arduino or ESP32 projects when you don't have access to an AC power source. Also suitable for Bluetooth speaker, keyboard, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, blood oxygen tracking equipment, pulse monitors, wireless, IoT. NOTE!!! The maximum operating current of this battery is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current
  • ✔【Reliable Performance】This 3.7 volt rechargeable battery provides reliable performance, no leakage and long cycle life. PCM protection function: overcharge, over discharge, over current, short circuit protection, over temperature protection
  • ✔【3000mAh LiPo Battery】The recommended battery charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V
  • ✔【Battery Specifications】Dimensions: 67*36*10mm/ 2.64*1.41*0.39inch; Weight: 35g; Capacity: 3000mAh; Volt: 3.7V. Plug: JST 1.25; Discharge Rate: 1C. (PLEASE NOTE battery size, voltage and plug match) NOTE!!! The maximum operating current of this battery is only about 1.5A, Can Not be used for unmanned aerial vehicles, model aircraft or other products that require high current
  • ✔【Storage & Usage】When storing lithium polymer batteries for a long time, please keep the battery in a state of 40%-60%. We recommend to charge the battery every 3 months after receipt of the battery and maintain the voltage 3.7-4.0V. Store battery in cool and dry place

Description

Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect.
Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection.
Short circuit protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged.
Please note: battery overcurrent protection is not a panacea, please do not continue to charge and discharge with large current, or the current and voltage beyond the range, otherwise the protection board will be damaged and invalid

Specification:
Standard voltage: 3.7V
Capacity: 3000mAh
Approximate weight: 21g
Dimensions (±2mm): 67*36*10mm/ 2.64*1.41*0.39inchinch(L*W*H)
Discharge rate: 1C
Working current: 1.5A
Maximum discharge current: 3C
Overcurrent protection: 1.8-2.1A
Connector Type: Micro JST 1.25
Standard Charging Method:
Charge the battery to 4.25V with a constant current of 0.2C, and then charge it with a constant voltage of 4.2V until the charging current is less than or equal to 0.05C.
Package Included:
1PCS 3000mAh 3.7V lithium rechargeable battery

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}