3.5inch Capacitive Touch Screen Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Pico 2 W/ ESP32 /Ar-duino, IPS Display 320x480 Resolution, SPI and I2C Control Interfaces
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
- 3.5inch Capacitive Touch Display Module, IPS Display, 320×480 resolution, 262K colors, clear and colorful displaying effect.
- Embedded with ST7796S Display Driver and FT6336U Capacitive Touch Controller, using SPI and I2C communication respectively, minimizes required IO pins
- Compatible with Raspberry Pi (Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Pico 2 W,etc) and ESP32 and Ar-duino
- High touch screen transmittance, fast response and long lifetime
- Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
- Onboard voltage translator, compatible with 3.3V / 5V operating voltage. Onboard TF card slot for storing more pictures, videos, music, etc.
- Comes with Online Development Resources /User Manual: bit.ly/3COAAla
-
ESP32-C6 Microcontroller WiFi 6 Development Board with Pre-soldered Header RISC-V 32-bit Single-core Processor 160MHz Support WiFi 6 and BLE 5 Support Raspberry Pi Pico Expansion Boards for AIoT
KWD 6
-
ESP32-S3 Development Board with 1.69inch Touch LCD Display 240×280 Pixels 262K Color, Embedded with ST7789V2 Display Driver and CST816T Capacitive Touch Chip,Supports 2.4GHz Wi-Fi/Bluetooth
KWD 12
-
ESP32-S3 RGB LCD Driver Board Comes with 2.1inch Round Touch Screen TFT RGB Display LCD 480×480 Pixels, with 32-bit LX7 Dual-Core Processor, 8MB PSRAM and Flash, Support W-i-F i & Blue-tooth
KWD 16
-
Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G Module, Global Multi-Band LTE 4G Cat-1, Support GNSS Positioning, 3X USB 2.0 Extended Ports, Compatible with Raspberry Pi/Jetson Nano
KWD 22.500
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
