- Shopping, made easy.
- /
- Get the app!
How to Use:
1: There is an adhesive pad at the bottom of the governor, which can be glued and fixed in the chassis.
2: Make holes on the chassis according to the size shown in the figure, and the potentiometer can be fixed in the hole of the chassis through nuts.
3: Set the screw column on the chassis according to the size of the fixing hole of the circuit board as shown in the figure, and fix the governor on the screw column.
Specification:
Item Type: 4 Pin Fan Adapter
Material: Plastic, Metal
Power Supply Voltage: 12V
Power Supply Interface: 6PIN (2x3) Interface
Fan Port Type: 2Pin / 3Pin / 4Pin
Package List:
2 x 4 Pin Fan Adapter
2 x User Manual
Note:
The total current connected to the fan shall not exceed the maximum current value of 13A to avoid damage to the governor.
PH41 X4 B Half Height Bezel M.2 NVME to PCIe 3.0 X4 X8 X16 Adapter Card with Heatsink Solution 32Gbps High Speed NVME M.2 to PCI E 3.0 Riser Card for Computer PC
KWD 4.500
Universal Copper Radiator 240mm Heat Sink Water Liquid Cooling Heat Exchanger for Computer Water Cooling, Beauty Equipment, Industrial Equipment (240mm)
KWD 18
Thermoelectric Peltier Cooler, DC 12V 576W 8 Chip TEC1-12706 DIY Thermoelectric Cooler Refrigeration Cooling Fan System Heatsink Kit, Low Noise Air Cooling Device for Pet Bed, Test Bench, etc
KWD 37
ASHATA Heat Exchanger Radiator,Aluminium Computer Water Cooling Radiator G1/4 Thread Water Cooler 18 Tubes Computer Heat Exchanger with Fan for PC Water Cooling System(120mm/ 360mm)(360mm)
KWD 24
