All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
520KB of SRAM, and 16MB of onboard Flash memory. Type-C connector, keeps it up to date, easier to use. Onboard 1.28inch capacitive touch LCD, 240×240 pixels, supports 65K color for clear color picture display
Lithium battery recharge/discharge header, suitable for mobile devices. USB 1.1 with device and host support. Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB. Accurate clock and timer on-chip. Temperature sensor. 6 × GPIO pin via SH1.0 connector
Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping
KWD 11
Waveshare ESP32-S3 1.69inch Round Display Development Board, Embedded with ST7789V2 Display Driver Chip, SPI Display, 32-Bit 240MHz LX7 Dual-Core Processor, Round Micro LCD Display
KWD 10
Waveshare 10 DOF IMU Sensor (C) Inertial Measurement Unit with MPU9250 Onboard and BMP280 Sensor Lower Power Consumption and Higher Performance.
KWD 19
Waveshare PL2303 USB to UART (TTL) Communication Module Compatible with 1.8V/2.5V/3.3V/5V Logic Level with USB-C Connector Adopts PL2303
KWD 5
