PCIe to Gigabit Ethernet and M.2 Adapter HAT Compatible with Raspberry Pi 5, Pi 5 NVMe HAT Support 2280/2260/2242/2230 NVMe M.2 SSD, 5Gbps Data Rate, High-Speed Reading/Writing, No Driver Needed
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
This is PCIe To ETH and M.2 Adapter, Compatible with Raspberry Pi 5. Extends 1x Gigabit Ethernet port. Equipped with RTL8111H high-performance Gigabit ETH chip, adopts sinking design of network port, neat and beautiful. No Driver Needed, Plug and Play.
Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 standard, Supports Booting PI5 From Solid State Drive.
Improves reading/writing speed of your Pi. Faster reading/writing speed compared to the TF card slot of Raspberry Pi , greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive.
NVMe: The theoretical transmission speed of the GEN2 Mode is up to 5 Gbps. The measured reading/writing speed is approx 500 MB/s
Onboard Dual LED Indicators. Easy to monitor the Working Status. Onboard Power Monitoring Chip And EEPROM. Real-time monitoring of Solid State Drive power status for More Stable operation.
Comes with Online Development Resources /User Manual: bit.ly/3YB6Fnu
ESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board Onboard ESP32-S3-WROOM-1 Series Module, 240MHz Dual Core Processor, 512KB SRAM 384KB ROM 8MB P SRAM 16MB Flash, USB-C Port
KWD 7.500
Pi Compute Module 4 Kit Comes with CM4104032-4GB RAM 32GB eMMC Flash with Wi-Fi, with CM4 Heatsink and CM4 Antenna, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Wireless & Bluetooth 5.0 (CM4104032 Kit)
KWD 45
ESP32-C6 Microcontroller WiFi 6 Development Board with Pre-soldered Header RISC-V 32-bit Single-core Processor 160MHz Support WiFi 6 and BLE 5 Support Raspberry Pi Pico Expansion Boards for AIoT
KWD 6
Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G Module, Global Multi-Band LTE 4G Cat-1, Support GNSS Positioning, 3X USB 2.0 Extended Ports, Compatible with Raspberry Pi/Jetson Nano
KWD 22.500
