Features

1. Support the full range of STM32 SWD interface debugging, the 4-wire interface is simple (including power supply), fast, and stable, and interface definition is directly marked on the shell!

2. Support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD, etc. are supported); supported software versions are as follows:

1）LINK ST Utility2.0 and above

2）STVD 4.2.1 and above

3）STVP 3.2.3 and above

4）IAR EWARMV6.20 and above

5）IAR EWSTM8V1.30 and above

6）KEIL RVMDK V4.21 and above

3. Support automatic firmware upgrade, the firmware has been upgraded to the latest V2.J17.S4 when leaving the factory

4. Add 5V power output, output I/O ports are protected, so don't worry about operating errors causing LINK ST V2 damage!

5. The interface uses a pure copper gold-plated 2.54 pitch simple horn socket, equipped with a 20CM DuPont line, which can cope with different target board line sequences and flexible wiring.

6. Use a USB flash drive aluminum alloy shell to protect the motherboard, which is easy to carry, not afraid of static electricity, and not afraid of falling and bumping.

Package Included:

1. LINK ST V2 one

2. 20CM debugging DuPont line one