Overview
RP2040-LCD-0.99-B is based on Raspberry Pi RP2040, Onboard 0.99inch LCD round display (with flat bottom), 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, adapting 4 × GPIO pins through SH1.0 6PIN connector, which makes it easy for you to develop and integrate it into products quickly.

Features
1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
3. 264KB of SRAM, and 2MB of on-board Flash memory
4. Type-C connector, keeps it up to date, easier to use
5. Onboard 0.99inch 128×115 pixels 65K colorful IPS LCD display (with flat bottom) for clear color pictures
6. 4 × GPIO pins are adapted through SH1.0 6PIN connector
7. Adopts CNC metal case with Acrylic dull-polish bottom plate
8. USB 1.1 with device and host support
9. Low-power sleep and dormant modes
10. Drag-and-drop programming using mass storage over USB
11. 2 × I2C, 4 × 12-bit ADC
12. Accurate clock and timer on-chip
13. Temperature sensor
14. Accelerated floating-point libraries on-chip
15. 8 × Programmable I/O (PIO) state machines for custom peripheral support

LCD Parameters
Controller: GC9107
Resolution : 128(H) RGB x 115(V)
Communication Interface: SPI
Display Panel: IPS
Display Dimensions: Φ33mm
Pixel Size: 0.19（H）x 0.19（V）mm

Provide Online Development Resources /User Manual : bit.ly/3OtugTb

Package Content
RP2040-LCD-0.99-B x1
SH1.0 6PIN cable x1