Uninterruptible Power Supply UPS HAT Compatible with Raspberry Pi 5 / 4B / 3B+, etc, Type-C Bi-Directional Fast Charging, 5V 6A Output, Supports Charging and Power Output at The Same Time
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board with Pogo pins connector design, powering the RPi via pogo pins, without using any GPIO resource, compatible with Raspberry Pi 5 / 4B / 3B+, etc.
Onboard ba-tte--ry fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface
Uninterruptible Power: It is able to charge ba-tte--ry and provide power output at the same time from external power supply. Automatically switch over to ba-tte--ry output if external power supply is unavailable, keeps the system running without any trouble
Supports 21700 large capacity ba-tte--ry Onboard warning indicators, easy to check if the ba-tte--ry is connected correctly. Note: ba-tte--ry are not included
Adopts USB Type-C interface, supports multiple input/output protocols. Onboard USB Type-A interface for 5V power output, more convenient for powering other boards.
Real Time Monitoring ---monitoring the Type-C port and ba-tte--ry voltage, current, power, and remaining capacity via I2C
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power
Provide Online Development Resources /User Manual: bit.ly/3Wsj8ZU
ESP32-C6 Microcontroller WiFi 6 Development Board with Pre-soldered Header RISC-V 32-bit Single-core Processor 160MHz Support WiFi 6 and BLE 5 Support Raspberry Pi Pico Expansion Boards for AIoT
KWD 6
Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G Module, Global Multi-Band LTE 4G Cat-1, Support GNSS Positioning, 3X USB 2.0 Extended Ports, Compatible with Raspberry Pi/Jetson Nano
KWD 22.500
Pi Compute Module 4 Kit Comes with CM4104032-4GB RAM 32GB eMMC Flash with Wi-Fi, with CM4 Heatsink and CM4 Antenna, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Wireless & Bluetooth 5.0 (CM4104032 Kit)
KWD 45
Industrial Grade Isolated USB to 2CH RS485 Converter USB to RS485 Adapter, Onboard Original FT2232HL Chip Stable and Reliable Communication, Support Win11/10/8.1/8/7,Linux, Android, etc.
KWD 11.500
