Search

HSSDTECH Bottom Cover Rubber Feet Strips Replacement for HP Envy X360 15-DA 15-DB 15-DR 15-DS 15G-DR 15G-DX 15-DS1063CL 15-DS1083CL 15-DR1075CL Bottom Case Nonskid Silicone Rubber Foot Strip(Black)

KWD 3.500

Weight
18 g
1 +

Special Features

  • Bottom Cover Rubber Foot Feet Pad FOR HP Envy X360 15-DA 15-DB 15-DR 15-DS 15G-DR 15G-DX 15T-DA 15Q-DS 15T-DB series A Pair of Rubber Feet Strips Set
  • for Laptop Bottom Case Nonskid Silicone Bumper Rubber Foot Strip FOR HP Envy 250 G7 255 G7 256 G7 for hp envy rubber
  • Rubber feet for electronics FOR HP Envy X360 15-DS 15G-DR series 15-DS1063CL 15-DS1083CL 15-DR1075CL 15-DR1679CL
  • Easy to use: There is adhesive on one side of the rubber strip,The adhesive on the Bumper Feet Strips of the release liner ensures that they are firmly attached to the bottom base of the laptop.Strong slip resistance ,excellent adhesion, and not easy to peel off.The effect is very good!
  • 【Replace the installation tutorial】 If you do not know how to install, please refer to the following installation tutorial, which provides detailed installation instructions. It will definitely meet your needs.

Description

Product Size:
Length 31.5 cm (12.4 Inch)
Width: 0.6 cm ( 0.23 Inch)
Thickness: 0.2 cm (0.08 Inch)

Laptop Rubber Feet Strips Replacement Tutorial
1. Choose a suitable Rubber Feet Strips Rubber foot pads are more durable and have a longer lifespan. Long service life, not easily detached
2.Remove the old foot Pads Before disassembling the old foot Pads, some tools need to be prepared. You can use a pointed knife or a thin pair of pliers to slowly pry off the old Rubber Feet Strips. Be careful not to forcefully pry open with hard objects to avoid damaging the body. At the same time, it is necessary to clean the back of the machine to ensure that the new foot pads are tightly attached to the bottom 

3.Repalacement new rubber feet strips. Prepare a new laptop Rubber Feet Strips, place it in the same position as the old one, and then slowly press it down. During the installation process, it is necessary to carefully observe the adhesion performance of each foot pad to ensure that it can be firmly adhered at every position. After installation, you can check if the new foot mat matches the body completely. 

Matters needing attention
1.When disassembling and installing, pay attention to gentle handling to avoid damaging the position of the body and screws.
2. Check the model of your laptop to avoid purchasing the wrong Rubber Feet Strips.
3. After installing the new foot mat, clean the machine to ensure better adhesion of the new Rubber Feet Strips.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}