Our TERMS AND CONDITIONS can be viewed here - https://www.leafgreensolutions.com/terms-and-conditions
Started noticing my Ego Snow blower was rusting badly and being torn up from the bare metal scraping on the concrete. Designed these Skid Shoes to help the snow blower handle uneven surfaces better and also help protect the plastic scraper. By creating less drag of the scraper on concrete I am able to snow blow faster over uneven cracks/bumps in the driveway. Kit includes a skid for each side along with stainless steel mounting hardware.

Works for the following Models - SNT2100 - SNT2101 - SNT2102 - SNT2110 - SNT2112 - SNT2114 - SNT2102
WILL NOT WORK FOR SNT2125 with the Heated Grips
You will need to drill 3/16th holes into your snow blower to mount these skids. It works best to use the skids as a template when drilling the holes. *Note: Drill bit is not included. Left & Right is based on standing in front of the snow blower with the nuts going on the inside of the snow blower. Recommended using some paint/primer on the drilled holes to keep rust from forming. You will receive 2 pad thicknesses with your order. Depending on how much you have worn your scraper down, you may find pads designed for a new snow blower are too thick allowing too much snow to pass under the blower. Use whichever pad thickness fits best for your needs. These skids are considered a consumable and should last a few seasons before needing replaced. Depending on use. They are meant to help protect your snow blower and make going over cracks easier.

Printed in a solid PETG Infill for extra durable strength.