Handmade galvanized steel trays for decorative use in any room or outside. Each tray is approximately 10"x4"x.75" and hand cut from 24 gauge USA made steel sheet metal. The steel is hemmed and bent by hand, then locked together by air compressor to create a single piece of versatile décor. No two trays are the same! The tray is Hot Dipped Galvanized (HDG) so it is more resistant to corrosion then normal steel would be because of the layer of zinc it gets from the process. Over time it will eventually start to rust and corrode depending on the moisture exposurer. If left indoors it most cerntaily will take a long time for this to take effect. If used outside it will happen faster due to being exposed to the elements.