Specification:
Two power ports: Power conversion port and Type-C port
Size: 40.4*39.4mm (1.59in*1.55in)
Input voltage: DC5-8V (Note: the server should choose the correct power supply)

How to use:
1. Supply power to the controller, the voltage can be DC5-8.4V， the specific voltage needs to refer to the actual use of the rated voltage of the servo motor to determine
2. Insert the servo motor into the 3-pin servo port
3. The default potentiometer control mode is used to start the machine. When turning the knob, the servo motor will rotate synchronously.
4. Short press the button to switch the control mode, respectively, corresponding to the following situations: Manual Mode: Control by knob
"Median Mode" : Return to the center
"Auto Mode" : Swing back and forth within the range of motion
5. Long press the button to switch the display mode
"Voltage Display mode": Displays the real-time power supply device voltage
"Position Display Mode" : Displays real-time steering gear position (range percentage 0%-99%)

Note:
Actuator position percentage display mode (0-99% corresponding to 0-180° or 0-270°)
180° steering gear: 50% represents 90°
270°steering gear: 50% represents 135°

Packages Includes:
2pcs* Motor Servo Controller