New brothread Soft & Cozy Embroidery Stitch Cover 12" x 10 Yd Fusible Light Weight Stabilizer Covering Scratchy Stitches

▶ Make Embroidery Soft to The Skin: Embroidery stitch cover is a soft covering made from 100% polyester iron on fusible backing that is used to cover the back of finished embroidery stitches on the inside of clothing. By covering the back of the embroidery, you are preventing threads from coming in contact with skin and causing irritation.
▶ Tender, Sheer, Almost Invisible: New brothread embroidery stitch cover up backing will stay permanently on your fabric. It is tender, sheer and almost invisible through clothing, highly recommended for lingerie, baby-wears and sportswear, or anywhere to avoid a scratchy irritant of thread to the skin.
▶ Multiple Use: The width 12" (30.5cm) can be cut to desired sizes or multiple pieces for large areas. It also can be used as ultra light interfacing.
▶ Using Steps: Step 1, Cut a piece of embroidery stitch cover that is slightly larger than the finished embroidery; Step 2, Just iron on the dot side (glue side) face onto back of garment with a press or an iron. You can feel with your hand until the glue side is getting a little rough.
▶ Using Notices: Recommended iron setting is 260°F/130°C (Silk setting on most irons), stay 10-15 seconds until fused. Make a test on the excess fabric to find out the best iron setting for your fabric.

Hello,