Electrical Specification
Operating voltage range: 4.8-8.4 Volts
Operating speed at no load ( 4.8V ): 0.14 sec/60°
Operating speed at no load ( 7.4V ): 0.10 sec/60°
Operating speed at no load ( 8.4V ): 0.09 sec/60°
Stall torque at locked ( 4.8V ): 39kg.cm(541oz-in)
Stall torque at locked ( 7.4V ): 55kg.cm(763oz-in)
Stall torque at locked ( 8.4V ): 61kg.cm(847oz-in)
Stall current at locked (4.8V ): 3.2A
Stall current at locked ( 7.4V ): 5.2A
Stall current at locked ( 8.4V ): 6.2A
Idle current at stopped (4.8/7.4/8.4V): 5mA
Control Specification:
Control System: PWM (Pulse width modification)
Pulse width range: 500-2500μsec
Neutral position: 1500μsec
Running degree: 270° (when 500-2500μsec)
Dead band width: 2μsec
Operating frequency: 50-330Hz
Rotating direction: Counterclockwise (When 1500-2500μsec)
Product Specification:
Suitable for: for 1/8 1/10 1/12 Scale RC Cars, Trucks
Limit angle: 360 degree servo
Bearing: 2BB
Horn gear spline: 25T Diameter:5.9mm
Case : Engineering plastics+Aluminum alloy
Motor: Coreless brush motor
Spline:25 Tooth
Gear ratio: 342
Bearing：Double Bearing
Waterproof Performance：IP67
Connector Wire: 12.6in (320mm)
Size: 1.57*0.79*1.59inch（40 * 20 * 38.5mm）
Weight: 2.11oz (60g)
CE /RoHs: Yes
Apply Environmental Conditon:
Storage Temperature Range:-30°C~80°C
Operating Temperature Range:-25°C~70°C
Packing List:
1 x BLS3355 55kg Servo (270°)
1 x 25T Adjustable Metal Servo Arm
1 x Accessories Set (As Shown on The Picture)