【Support PPM signal output】T16D/T12D transmitter can be used as a trainer, Radiolink T16D/T12D/T8FB/T8S, AT9S Pro/AT10II can be used as a trainee. Receivers R8EF/R8XM/R8FM/R8SM/R7FG, R6DSM/R6DS/R12DSM that support PPM signals can be used to connect to the wireless trainer cable.
【Improve Teaching Efficiency】The Type-C TWC wireless training cable is only 3g/0.11oz and 15cm/5.91in so that it can be carried around. Training can be started smoothly without complicated operations which greatly improves teaching efficiency. Students can practice on their own in the trainee mode, coach can switch to the trainer mode at any time to save the plane if it is out of control to avoid losses.
【Easier for Trainer】Different from the traditional trainer cord, the wireless training cable requires no cable connection between the trainer and the trainee transmitter. Free from cable limitations, the trainer can move whenever necessary, especially since it also ensures good remote control even trainer is 600 meters(1969ft) away from the trainee.
【More Relieved for Trainer】The trainer function interface is equipped with a function on/off button. The wireless training cable can only be powered on after the function is turned on to prevent students from accidentally plugging the wireless training cable and causing danger. Even the RC beginners can enjoy the fun of acro flight with the trainer mode on.
【Power Switch to Prevent Accidental Plugging】The TRAINER function menu has a power switch to turn on the trainer, which can prevent danger because of accidental plugging in.
【Anti-interference Communication Technology】T16D/T12D has upgraded and optimized the original communication technology, improving the response speed and fault tolerance. The excellent compatibility and software expansion enable the receiver to communicate smoothly even if the trainee receiver stays close to the trainer transmitter, the communication technology is the key point to making the RadioLink wireless trainer function come true.
【3ms Quick Response】Radiolink transmitters take only 3ms for all the channels' response synchronously. Signals are stable and responsive without any delay even have been transmitted twice by both trainee and trainer transmitters, ensuring a better RC experience.
【High Efficiency & Low Consumption】With the switch power supply module integrated, the RadioLink wireless trainer system ensures a stable voltage output of 5V and the receiver won't easily get damaged by high voltage. The power supply of the trainer transmitter can provide power to the wireless trainer system synchronously with highly efficient power management.
【Innovative Alternating Mode】The trainer function can be easily activated with a single flip of the trainer switch, preventing finger fatigue from prolonged holding.
Radiolink R6FG 6 Channels 2.4GHz RC Receiver with Gyro, Surface Long Range Control RX for Vehicle Drifting/Crawler/Truck/Boat Works with Radio Controller RC4GS V3/RC6GS V3/RC4GS V2/RC6GS V2/T8FB/T8S
KWD 7.500
Radiolink RC4GS V3 5 Channels RC Transmitter and Receiver, 2.4GHz Surface Remote Controller R6FG Gyro RX Combo, 30 Models Storage for RC Crawler, Drifting, Bash, Buggy Cars and Boats
KWD 27
-15%
Radiolink RC6GS V3 7 Channels RC Transmitter and Waterproof Gyro Receiver R7FG, 30 Models Storage 2.4Ghz Voltage Telemetry Surface Remote Radio Controller for RC Crawler, Drifting, Car and Boat
KWD 30
Radiolink 2.4Ghz R6F 6 Channels RC Receiver Long Distance Control for Car/Boat Surface Remote Controller RC6GS V2/RC4GS V2/RC4GS V3/RC6GS V3 (No Gyro)
KWD 7
