Product Description :

product name : Electric Fence System for Dog Shock Training Collar with Remote

Specifications:

Materials: ABS
US Plug Of Remote: 100-240V
Collar Battery Type: 4LR44 6V
Suggested Wire Bury Depth: More Than 1in Underground
Transmitter Size: 14.3x9x5cm/5.63x3.55x1.97in
Per Collar Receiver Size: 6.5x3.5x3cm/2.56x1.38x1.19in

function:

Proportional impulse stimulation-the closer your dog is to the boundary line, the greater the shock intensity will be.
Variable range control—allows you to better control the signal range.
Speed Detector—The faster your dog moves, the faster the intensity level it emits.

How It Works:

1.Wall-mounted transmitter:Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop.

2.The receiver collar:Receiver(collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.

3.How to install the system

- Design your containment area and calculate the amount of wire needed.
- Install the wall transmitter.
- Lay out the perimeter wire.
- Connect the perimeter wire to the wall transmitter.
- Verify transmitter is functioning without problem.
- Set up the receiver and then,test the containment system and adjust -the field width.
- Install the boundary wire and training flags.
- Fit collars to your dogs and train your dogs.

Package Includes:
1 x indoor wall-mounted transmitter
1 x power plug
1/2/3 x adjustable receiver collar
1 x 300 Meter Roll of fence Wire
4 x Screws
1 x User's manual