This charger makes field charging your model plane, drone, or quadcopter easy!
When you connect a discharged 1s battery to the charger the corresponding ports red LED will light on until the battery is fully charged.

Features：
Could charge up to 5 pcs batteries with JST 1.25 or JST PH2.0 power plug at once.
4 types connectors support most 1S Lipo batteries' charging: Micro JST 1.25; JST-PH 2.0; Micro Losi; JST
Charge at either 200mA or 500mA according to the setting of a switch that can be set independently for each port
2 powersources: XT60/USB input
2 indicator lights:
Blue LED:
Charging- Always bright
Full charged- off
The battery is not connected- flash
Red LED:
Power on- Always bright
Power off- off

Specifications:
XT60 input: 2-6S(7.4V-22.2V) Lipo battery
USB input: ≥2A output USB adapter
Output port: micro JST 1.25/JST-ph 2.0
Output current: 200mA/500mA switchable
Connector conversion cable: JST-PH 2.0 male to Micro Losi female and JST female (5 pack)Dimension: 153x16x5.88mm (6.02x0.63x0.23inch)
Weight: 14g

Package included:
1 x 1S Lipo battery charging board
5 x JST-PH 2.0 male to Micro Losi female and JST female cable