Steps for using paving molds:

Step 1:Mix cement with water according to package directions. When ready to use, the consistency of the cement will be comparable to oatmeal and thick enough to hold an edge when you slice into it with a shovel..
Step 2: Use a trowel to scoop the concrete into the paver mold, making sure to fill each area.
Step 3: Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4:Following the contours of the mold, smooth the concrete and wipe away any excess.
Step 5: Allow the concrete to set for up to five minutes, then carefully remove the mold. Next, rotate the mold a quarter turn and place it next to the paver you just finished, adjusting the angle slightly if you're laying a curved path.
Step 6: After allowing the concrete to cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly laid pavers to help them settle.

Specification:
100% Brand New
Material:high quality plastic
Product Size:17.7 x 15.7 x 1.57inch(LxWxH);

Package Includes:
2x Garden Paving Mould