Search

ShareGoo CH3 Control LED Light Lamp Panel Control Switch Compatible with HSP Traxxas Tamiya CC01 4WD Axial SCX10 1/10 1/8 RC Car Truck Crawler

KWD 4

Brand
Share Goo
Weight
5 g
1 +

Special Features

  • Note:Please make sure that the remote controller have a CH3 function button.Otherwise it does not work.
  • Compatible with HSP Traxxas CC01 Axial SCX10 1/10 1/8 rc car truck .Could work for 12 pieces 5mm led lights.
  • Method of use: Connect the JR connector to the receiver third channel(CH3), switch the controller CH3 switch swiftly twice or once and the flashing mode will change.
  • Work voltage: 4.8~6V. Using receiver as power supply.
  • Wire Length: Approx. 19cm/ 7.48inch.If you need the rc led lights,you can find it in my store.

Description

Note:Please make sure that the remote controller have a CH3 function button.Otherwise it does not work.

Compatible with HSP Traxxas CC01 4WD Axial SCX10 1/10 1/8 RC Car.
Could work for 12 pieces 5mm led lights.
Using receiver as power supply.Work voltage: 4.8~6V

Operating Mode of Normal Switch:
Each time the third channel switch is toggled or pressed, the cycle changes:
Both outputs are off →A output is turned on,B output is off → A output is off,B output is on → Both outputs are on → Both output is off...

Operating Mode of Upgraded Switch :
Each time the third channel switch is toggled twice or pressed twice, the cycle changes:
Both output off → A output is open, B output is off → A output is off,B output is on → Both output is on → Both light breathing flash mode open → both output off... ...cycle

Wire Length: Approx. 19cm/7.48inch
Replacement parts for rc rock crawlers,and is a good choice for RC car fans.
Material: Metal, Plastic

Package include:
1 * RC CH3 LED Light Lamp Control Panel

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}