FMS FCX24M simulation RC 1:24 camel cup first generation C model climber RC buggy modification fender liner. High toughness resin material, factory fitted with screws Installation method directly put the left and right pieces of the product to the left and right sides of the frame beam. Remove the factory screws in the corresponding small hole position. Large holes are for the factory screws to avoid the empty space. There is no need to remove the screws. Then the product with the screws to fix the product according to the original hole position can be installed back. This product for the later car shell to install lights to avoid the empty space. At the same time increase the simulation of the vehicle when taking pictures. Avoid wearing gangs and reduce dust into the car.