ELUTENG PCIE USB 3.2 Card 8 Ports PCI Expree to USB C Expansion Card Superspeed 6 USB and 2 Type C PCI-e USB3 Hub Controller Adapter 3 Independent Power Module
【USB3.0 8 Interface】 Type-A + Type-C USB3 dual interface, can run two devices at the same time, compatible with the existing USB peripheral products. In order to make the power supply of each interface stable, the capacitor adopts the solid state patch type that can withstand the high temperature of 250 degrees.
【 High Quality Chip】 USB 3.1 expansion card adopts new high quality NEC720210+NEC720201 main control chip and advanced low voltage power supply process, the maximum usb3.1 Gen2 supports 10gbs(theoretical value).
【Security & Reliability】 When the external USB device is broken down or the current is too large, immediately cut off the power to protect the peripheral and personal computer. After the fault is rectified, the system automatically recovers. Each port is equipped with independent capacitors that do not require an external power supply, ensuring a more stable power supply. The two interfaces can operate independently and do not interfere with each other, so the operation is more stable.
【Stability & Heat Dissipation】 The use of alloy materials with high thermal conductivity can effectively heat dissipation, so that the expansion card is always at room temperature and the work is more stable.
【Wide Compatibility】 For PCI-E X2 / X4 / X8 / X16, not for PCI-E X2 and PCI. Windows 10 system plug and play, no need to install drivers. If it does not work, provide a screenshot of the device manager or replace the slot. Computers sometimes don't recognize that. Windows 7 / XP/Vista requires drivers to be installed, and Windows 8/10 does not.
Description
Add 2 Type-C USB 3.2 Gen 2 ports with up to 10Gbps data rate to your computer.
Features
Data transfer rate:
USB 3.2 Gen2 up to 10 Gbps
Host Controller Chip: ASM3142
Low Profile PCIe Form Factor board
Supports PCIe 1.0, 2.0, or PCIe 3.0 motherboard
Compatible with PCIE X4, X8, X16 slot, NOT works on PCIE X1, X2 slot.
Note: The card does not support DP Alt Mode or USB Power Delivery (USB PD) specification.
SEDNA - PCI to 1 Parallel Port ECP / EPP adapter Card (With Low Profile Bracket)
KWD 9
PCIe Gen3 x2 USB 3.2/3.1 Card ASM3142- PCI Express to 4-Port Type C HUB Internal Expansion Card Controller Adapter PCI Express Card Desktop PC Support Multiple INs
KWD 19
HP Compaq Standard Bracket Printer Parallel Port Adapter 462537-002
KWD 2
10Gtek# 6G Internal Mini SAS 36pin SFF-8087 Male to 4X SATA 7pin Female Fan-Out Cable, 0.5-m (1.6ft)
KWD 3.500
