High-quality materials: These Chicago screws are made of high-quality carbon steel, high-grade nickel plated, with a stable and dense oxide film on the surface that will not loosen, sturdy and rust resistant.
The finish of these Chicago buttons is ideal for high yield products. The finish is very good, and the screw heads are well chamfered (tapered). Also the grooves are low-key, which have a professional look and can be easily removed and installed. You can add or subtract as much paper as you like.
Widely used in DIY leather craft and book binding, these leather screws are perfect for adding decorations to DIY craft decorations. Especially suitable for leather straps, handbags, leather shoes, binding documents, books, photo albums, DIY crafts and other leather crafts. You can use it as you please.
Standard slotted head design, easier to bundle or disassemble. Round smooth rivets, hard and thick, all colors, it can be applied to a variety of leather processes.
Product name: Leather Rivets
Material: Carbon steel
Head type: slotted
Dimensions :5x12mm, screw diameter 5 mm (3/16 inch), screw length 12mm (1/2 inch)
Screw head diameter :9.5 mm (3/8 inch)
Color: Silver
Installation method:
Step 1 Cut holes in the leather.
Note: The hole should not exceed 4 mm. If the hole is too large, it can easily cause the screw to fall off.
2. Select the right length of leather rivets.
3. Thread the stud through the hole.
4. Align the nut with the screw thread and tighten the screw.
Tip: Contains small parts, please keep away from children.
Packing contents: 50 sets leather rivets
Warm reminder
The hole should not exceed 5 mm during installation. The hole is too big to fall down.
Due to manual measurement, please allow an error of 1-3 mm.
Due to the light and different displays, please allow for slight chromatic aberration.