The removal tool is capable of extracting gears with a maximal outer diameter reaching 11mm and a tooth height that is less than 12mm. It is designed with precision and efficiency in mind, allowing for smooth and effortless removal of such gears.
Comprises 5 pins for the diameter of the motor shaft, 0.9mm (cylindrical), 1.75mm (semi circular), 1.75mm (cylindrical), 1.9mm (cylindrical), 2.8mm (semi circular).
Material upgrade: Utilize the material with a higher level of hardness, which is not liable to deform. This upgraded material also offers enhanced durability and resistance to wear and tear, ensuring a longer lifespan for the product.
Installation: 1. Rotate the gear puller's rod and tighten the screw. 2. Insert the puller's rotating rod into the bracket. 3.Fit the sliding plate.4. Secure the motor in the travel plate and align the shaft with the pin.5. Evenly rotate the lever clockwise to extract the motor gear.
Note: It is suggested that you go slowly when attempting to pull the gears off. Some pinion gears are firmly adhered to the motor. In such cases, please attempt to heat the gears up first. If the glue does not melt, it is not advisable for you to attempt to pull the pinion gears off.
Remote Control Dinosaur Car Toys for Kid Boys, 2.4GHz RC Monster Truck Toys with Spray, Light, Sound, Indoor Outdoor All Terrain Rechargeable Electric RC Car Toy, for 4-12 Kids (Red)
KWD 8.500
Jutagoss Aluminum Electric Engine Motor Heat Sink Cooling RC 380 390 Fins Brushed Brushless Motors for RC Car Accessories Red 1PCS
KWD 4.500
Rcawd RC Shocks Upgrade Parts for 1/10 Arrma Senton 4X4 Granite 4X4 Vorteks 4X4 Arrma Bigrock 4X4 Typhon 4X4 RC Truck,4PCS Full Aluminum Front Rear Big Bore Hops Up,Replace AR330550 AR330551,Green
KWD 13
-27%
Upgrade Parts for 1/10 Slash/Rustler/Stampede VXL 2WD,Stainless Steel Drive Shaft CVD Axles,Alloy Caster Block & Steering Blocks & Rear Stub Axle Carriers,Driveshaft Front Axles,Green
KWD 15
