Introduction
The new carving and polishing machine, chisel instead of the traditional hand-carved, is now entering the era of the electric;
rate several times higher than the hand-carved, saving time and effort. One-third of the force can be hand-carved,
three to five times the speed of sculpture,without fatigue.

Segment produce ultra-high speed micro vibration 10,000 times per minute touch wood,
this ultra- high-speed vibrations for carving and polishing.

Characteristics:
1.Hanging the host machine above the workbench can save more space and facilitate operation.
2. ABS industrial plastic electronic pedal, light weight. When used, it will not generate heat and prolong the service life of the switch.
3. Up-pressure decelerates and down-pressure accelerates. Through the foot pedal control speed, easy to operate.
4. The engraving speed can be changed at any time, and the hands and feet can be used at the same time to improve the working efficiency.
5. Tighten the screw at the bottom of the pedal to directly control the corresponding speed and adjust it arbitrarily (the tighter the screw, the faster the speed).
6. Low noise, only slight vibration of the handle, long working hours are not easy to fatigue.

Parameters:
Rated voltage: 110V
Output power: 380W
Rated power: 50Hz
Standard chuck adjustable range: 0.1-4mm
Rated rotation: 0-25000R/min
Switch: electronic pedal infinitely rotating speed

Package Include:
1x Host
1x Flexible shaft
1x High precision handle
1x Wrench
1x Foot switch 5x Carving blades