1. Can I use torch/heat gun to remove bubbles ?
No, we don't recommend, as it will eventually damage the silicone molds.
Here are some tips to avoid bubbles:
1) Pour resin by layers.
2) Let the resin sit for about 5 mins before pouring into the mold.
3) Use low viscosity resin.
4) Dip the flowers first in resin before placing them in the mold.
2. Why my resin become extremely hot ?
When resin and hardener combined, an exothermic reaction occur which allow the blend to solidify.
The warmer the resin/weather, the quicker the resin cure, the hotter it becomes.
ATTENTION: You still need to avoid touching the resin molds while curing.
Please keep them out of children and pets.
Here are the ways to avoid resin become too hot:
1. Don't heat up the resin before use.
2. Pour resin in layers, waiting 4~6 hours between each coat.
3. Maximum thickness is less than 2'' inches each layer.
3. How to avoid bubbles at the tip ?
Pour a little resin into the mold first, then poke the tip part with a stick to remove the air to avoid bubbles occurs.
PACKAGE - 2 PCS Lighter Protective Cover Mirror Silicone BIC Lighter J3 J5