Iron On / Sew On Patches/ Badges For Clothes, Bags, Dressing etc. Not only can be a patch but also can be a cool decoration. Apply on your own Clothes, Jackets, Jeans, Caps, T-Shirts etc. Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. How to Iron? (Iron on Patches Only) Appliques and embroidered patches can be ironed onto anything you can iron: shirts, jeans, hats, pants, skirts, etc. Make your backpack or tote unique! With an iron on you can create a new look instantly.It'so easy! Heat seal to polyester/cotton fabrics. Do not apply to rain wear (waterproof), highly elastic, rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to the garment and is washable, dry able and dry cleanable. For machine washing, turn garment inside-out before washing and drying. Iron on appliques and embroidered patch setting instructions using an Iron: Step 1: Set your hand iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION! Step 2: Place your applique or embroidered patch in the desired position and place a pressing cloth (such as a handkerchief, sheet or pillowcase fabric) over top. Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH. Step 4: Turn the garment INSIDE-OUT and repeat steps 2&3. Step 5: Allow the applique or embroidered patch to cool down.