Godox Trigger SONY Version, Only Compatible with Sony Cameras. Godox XPro-S ttl wireless flash trigger transmitter for sony cameras. ||There is a film on the product screen, if you see small traces like scratches on the product screen, it is normal to exist. If you still have problems, you can contact me by email, I will actively follow up and solve your problem. The XPRO-S flash trigger can be quickly fixed on the camera with the metal hotshoe. Compatible with Sony A7III, A7IV, A7R5, A7RIII, A7RIV, A9, A7RII/V4.0, A7R, A6400, A6700, A6000, RX10, A99, A77II, A350 ect.
TTL Autoflash and Pro Functions: The XPro-S TTL wireless flash trigger supports TTL Autoflash, 1/8000s High-Speed Sync, Multi Strobe Flash, Manual Flash, Flash Exposure Compensation (FEC), TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
TCM BUTTON: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode.
Versatile Using Methods: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Sony Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack. Xpro-S Can Control the Sony Original Flashes Such as F42AM/HVL-45RM/HVL-F60M/HVL-F43M/HVL-F32M/F58AM When Using In Combination with Godox X1R-S Receiver (Sold Separately)
01-99 WIRELESS ID: Remote control via 2.4GHz stable connection for flashes up to 5 groups, 32 channels, and 01-99 ID settings, and set them all on the same channel and ID settings to tigger without signal disturbance
Screen Magnification Function: The flash trigger features an LCD ultra large high definition display screen where up to five flash groups are shown at one time. Double click the group button quickly to switch from the setting page of all groups (A-E) to the enlarged view of the settings and related details of the corresponding group. The five group buttons, four function buttons, and a scrolling wheel makes parameter settings clear, intuitive, and easy to use
The Reason & Solution of Not Triggering:【1】Please make sure that whether the flash has finished its recycle or caught up with the continuous shooting speed or not(the flash ready indicator is lighten) and the flash is not under the state of over-heat protection or other abnormal situation. Solution: Please downgrade the flash power output. If the flash is in TTL mode, please try to change it to M mode(a preflash is needed in TTL mode).【2】Whether the distance between the flash trigger and the flash is too close or not. Solution: Please turn on the“close distance wireless mode" on the flash trigger ( < 0.5m), AND set the C.Fn-DIST to 0-30m.
The Reason & Solution of Not Triggering:【3】Disturbed by the 2.4G signal in outer environment (e.g. wireless base station, 2.4G wifi router, Bluetooth, etc.). Solution: To adjust the channel CH setting on the flash trigger (add 10+ channels) and use the channel which is not disturbed. Or turn off the other 2.4G equipment in working.【4】Whether the flash trigger and the receiver end equipment are in the low battery states or not. Solution: Please replace the battery.
Description
Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc