The Milescraft® TrackSawSquare™ makes setting up perfect 90 degree, straight cuts, fast, easy, and accurate.
Designed specifically to fit our proprietary rail system, the TrackSawSquare™ will be the go-to accessory when ripping down sheet goods using the Milescraft® 1409 TrackSawGuide™. Just measure and mark the cut line, and position the rails and square in place for a perfect cut.
The TrackSawSquare™ connects to the bottom of the rails using two T-bolts and custom designed auto-centering trapezoidal ridges. The geometric shape pulls the guide square into the T-track channels and lock the TrackSawSquare™ in at a 90 degree angle to the rail. With a symmetrical design, the square allows for use at either end of the rails- at the start of the cut, or on the opposite end.
With a low-profile design, it is even able to sit flush on boards and panels as thin as 1/2 inch thick. The lightweight design prevents the TrackSawSqaure™ from tipping the track, but an extra built in Stabilizer can be extended to provide even more support.
With two rubber, anti-slip strips, the TrackSawGuide™ can be used without clamps, but we thought of that too! The TrackSawSquare™ has two reliefs machined into the profile which allow Milescraft Track Clamps and the square to be used together.
For fast, accurate, square cuts that speed up projects and produce better results, make sure the TrackSawGuide™ is squared away with the Milescraft TrackSawSquare™.