SpecificationsModel: Cinelog30 V3 O4 Pro Quadcopter
Frame Model: GEP-CL30 V3
Carbon Fiber Plate Thickness: 2.5mm
Wheelbase: 128mm
Flight System: TAKER F722 45A 32Bit AIO
MCU: STM32F722RET6
Gyro: ICM 42688-P
FC Firmware: GEPRC_F722_AIO
Flash: 16MB
ESC: 32Bit 45A
Motor: SPEEDX2 1404 3850KV
Prop: HQprop DT76mmx3 V2
Battery Connector: XT30
VTX: O4 AIR Unit Pro
Camera: O4
Antenna: O4 original
Receiver: PNP(digital built-in VTS receiver) / ELRS2.4G / TBS NanoRX
TBS NanoRX Version Weight: 187±2g
Recommended Battery: LiHV 4S 660mAh-720mAh
Flight Time: 8'10″（Tested at slow cruising speeds; actual times may vary with flying method.)
Includes1 x Cinelog30 V3
1 x Protective Frame (transparent black)
2 x HQprop DT76mmx3 V2 (pair)
1 x 15*150mm Battery Strap
1 x L-shaped Screwdriver 1.5mm
1 x Grey Canopy
1 x Black Canopy
1 x Spare Screw Pack
1 x Battery Anti-slip Pad
1 x Damping Ball Puncher
1 x Frequency Pairing Ejector pin
Spare screws pack includes1 x M2 rivet nut
4 x M2*4.5 button-head hex socket screw
4 x M2*6 button-head hex socket screw
4 x M2*4 button-head hex socket screw
1 x M2*12 button-head screw
2 x Damping Ball