3 Pcs Set Draw Bar Collet Chuck 1/2", 3/8", 1/4" MT2 Taper and Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread for Woodturning Lathe Spindle.
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Drawbar Collet Chuck are designed for use with Drawbar Collet Chuck system MT2. Inexpensive quality chucking system for turning small projects like spinning tops, birdhouse finials and similar items where accuracy and tool accessibility are a priority.
Many professional pen turners prefer using a drawbar collet chuck for holding pen mandrels as it eliminates the risk of off-center pen barrels and project tubes so you get the very best results possible.
Screwed on Drawbar kit TSSH-3/8-50 with 3/8"x16TPI thread for use together.
With the help of the safety rod, the drill chuck or other tools on the spindle of the lathe can be prevented from loosening.
Draw bar kit can be also used together with a drill chuck, for example when machining small workpieces, or when receiving polishing abrasives.
Description
3 Pcs Set Draw Bar Collet Chuck 1/2", 3/8", 1/4" MT2 Taper and Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Pen Press Kit For Woodturning Lathes with 2MT Taper.
KWD 8
Pen Mandrel with 1"X8TPI Thread Adaptor for Woodlathe Woodturning Pen Make.
KWD 11.500
NCK-3.75Z-6017 Long Nosed Jaws for BMWOOD NCK Series Woodturning Lathe Chuck, Compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.
KWD 19
NCK-3.75Z-DJDT Dovetail Jaws with Outsdie Dovetail and Inside Thread for BMWOOD NCK Series Chuck, Compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3,SC4.
KWD 16
