Note:
All for Canons dummy battery kits,the battery cover must be closed during use before can be used normally

Fomito WY-E6 Model (NP-F970 Battery Board to LP-E6 Dummy Battery Adapter Plate)
Special Note:
1.DC 12V/2A(Output) interface model is 5.5*2.5mm
2.DC 8V/3A(Output/Input) interface model is 5.5*2.1mm,dummy battery cable only can connect the DC 8V/3A hole
3.To avoid burning the product and equipment,please ensure to use the correct rated voltage and current of the electrical equipment
4.When this inferface is input, the battery must be removed. Otherwise, the battery or product willl be damaged
5.When charging the battery, the switch must be turned on to charge the battery(I=On, O=Off)
6.When removing the battery, you must press and hold LOCK to remove the battery. It is not necessary to do so while install the battery
7.Do not overload this product, and stop using it if the temperature is high
8.The product has high power,it's recommended to use NP-F970 battery about 7000mah

Features:
*Sony NP-F970 Transfer to LP-E6 Adapter Mount Plate
*Say goodbye to the short battery life
*Extend camera battery life
*Let shooting no longer worry about battery
*Never miss wonderful moments

Specifications:
Model:WY-E6(Sony NP-F970 Transfer to LP-E6 Dummy Battery)
Plate Mount Material: Shell ABS + Metal aluminum plate + Metal copper gold plated pin
DC Output: 12V/2A(Output) and 8V/3A(Output/Input)
Dummy Battery Interface Hole: DC8V/3A 5.5*2.1mm
DC Spring Line Interface Size: 8V/12V 5.5*2.5mm-5.5*2.5mm

Package Included:
1 x for Sony NP-F970 Transfer to LP-E6 Adapter Mount Plate
1 x LP-E6 Dummy Battery
1 x DC Male to Male Spring Cable
1 x 1/4" Hand Screw
1 x Iron sheets for 1/4" Hand Screw
1 x 1/4" Double Hot Shoe Mount
1 x Fomito Storage Bag
1 x Instructions