On the chart on this page,find the model of your router and the corresponding letter that represents the mounting hole pattern on the base plate drawing.Locate the hole pattern on the base plate and mark with wax crayon or felt tip marker.
Ensure your router has a 1/4" collet installed and place the universal base onto the router lining up the marked mounting holes.Install the choosen machine screws but do not tighten. Insert the enclosed alignment pin into the 1/4" collet until it almost contacts the guide bushing. Tighten the collet lightly onto the pin. Carefully adjust the router depth so the pin makes contact with the alignment pin.Tighten the machine screws.Note:if the machine screws supplied bottom into the router mounting
Universal design fits any router having a base plate with a 1-3/16"* dia. center hole.
O'SKOOL 78" Flexible Curve Guide for Router, Adjustable Template for Trim Routing odd Shape and Complex Contour curverture
KWD 12.500
O'SKOOL 24 Inches Long Router Table Fence System with Feather Board, Bit Guard, Adjustable Stop and Dust Port
KWD 34
O'SKOOL 32" x 24" MDF Router Table Top
KWD 65.500
O'SKOOL 37inch Flexible Curve Template Woodworking Tool
KWD 19
